HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 513
Examples
To display the state of a port:
See also
authUtil
portCfgLongDistance
portLoginShow
portName
switchShow
switch:user> portshow 2/15
portName: Tape drive 8
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x903 PRESENT ACTIVE E_PORT G_PORT U_PORT
LOGICAL_ONLINE LOGIN
portType: 10.0
portState: 1 Online
portPhys: 6 In_Sync
portScn: 16 E_Port Trunk port
port generation number: 0
portId: 012f00
portIfId: 43320010
portWwn: 20:2f:00:60:69:e4:20:42
portWwn of device(s) connected:
None
Distance: normal
portSpeed: N4Gbps
Interrupts: 0 Link_failure: 0 Frjt: 0
Unknown: 0 Loss_of_sync: 3 Fbsy: 0
Lli: 15 Loss_of_sig: 2
Proc_rqrd: 0 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 0
Overrun: 0 Lr_in: 3
Suspended: 0 Lr_out: 1
Parity_err: 0 Ols_in: 0
2_parity_err: 0 Ols_out: 3
CMI_bus_err: 0