HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 511
No_Card
No_Module
No_Light
No_Sync
In_Sync
Laser_Flt
Port_Flt
Diag_Flt
Lock_Ref
No interface card present
No module (SFP or other) present
Module not receiving light
Receiving light but out of sync
Receiving light and in sync
Module is signaling a laser fault
Port marked faulty
Port failed diagnostics
Locking to the reference signal
portScn Last state change notification for port.
port generation number Port generation number for the last offline state change.
portId 24-bit port ID.
portIfId User port’s interface ID.
portWwn Port WWN.
portWwn of devices
connected
Port WWNs of connected devices.
Distance The port's long-distance level. In case of LD mode, the user configured
limit and actual distances also are displayed. See
portCfgLongDistance.
portSpeed The port's fixed speed (1, 2, or 4 Gb/s) or negotiated speed (N1, N2,
or N4 Gb/s).
Interrupts Total number of interrupts.
Unknown Interrupts that are not counted elsewhere.
Lli Low-level interface (physical state, primitive sequences).
Proc_rqrd Frames delivered for embedded N_Port processing.
Timed_out Frames that have timed out.
Rx_flushed Frames requiring translation.
Tx_unavail Frames returned from an unavailable transmitter.
Free_buffer Free buffer available interrupts.
Overrun Buffer overrun interrupts.
Table 17 portShow display fields (continued)
Field Description