HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

510 Fabric OS commands
Displays port status.
Synopsis
portshow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display status information for the specified port, as shown in Table 17. Information
varies with the switch model and port type.
portShow
Table 17 portShow display fields
Field Description
portName Name assigned to the port by the command of the same name.
portHealth Current health of the port (Fabric Watch license required).
Authentication Authentication type and associated parameters, if applicable, used on
the port at port online or when enabling security, whichever occurs last.
States include:
None
FCAP
DHCHP
No authentication was done.
FCAP authentication was done.
DH-CHAP authentication was done. It also displays the
DH group and hash used for authentication.
portDisableReason The reason that a port has been disabled, if it has not been disabled by
portDisable or portCfgPersistentDisable.
portCFlags Port control flags.
portFlags Bit map of port status flags, including information on the type of port,
whether it is fully online, and whether logins have been accepted on it.
portType Port type and revision numbers.
portState Port SNMP state:
Online
Offline
Testing
Faulty
Persistently
Disabled
Upand running
Not online; portPhys gives details
Running diagnostics
Failed diagnostics
Persistently disabled
portPhys Port physical state: