HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

492 Fabric OS commands
sn Speed negotiation states
fcin Incoming fibre channel information unit
fcout Outgoing fibre channel information unit
read Information unit header log from read operation
write Information unit header log from write operation
err Information unit header log of an fc error frame
frame fc frame payload
nsRemQ Inter-switch name server query
rscn RSCN
xalloc Allocate an exchange
xfree Free an exchange
xerr Exchange error
xstate Exchange state
payload Frame payload
Port Displays the port number that logged the event.
Cmd Defined by the event. Displays a value defined by the event as follows:
ioctl I/O control command code
Tx & Rx Frame payload size
scn New state (see state codes below)
pstate New physical state (see pstate codes below)
ctin The CT-subtype:
fc Simple Name Server
f8 Alias Server
ctout Same as ctin above.
errlog Error level (see errModuleShow)
loopscn Current loop state during loop initialization, possible values
are:
OLP Offline (disconnected or nonparticipating)
LIP FL_Port entered INITIALIZING or OPEN_INIT state
LIM LISM completed, FL_Port became the loop master
BMP Loop init completed, FL_Port in MONITORING
state
OLD Port transited to the OLD_PORT state
TMO Loop init times out
Args Displays additional information about the event as follows:
start Start type: 0 = enable ports, 100 = disable ports
disable State (see state codes next)
enable Mode: 0 = normal
nonzero = loopback
Tx & Rx Header words 0,1,4 (R_CTL,D_ID,S_ID,OX_ID,RX_ID) and
the first payload word
reject FC-PH reject reason
busy FC-PH busy reason