HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

484 Fabric OS commands
Displays port login status.
Synopsis
portloginshow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display port login received from devices attached to the specified port. Some
information varies with the switch model and port type. The following lines appear:
There is further information about the login after the above columns. This can include the DID (destination
identifier) that the port is logged on to.
Operands
This command has the following operands:
portLoginShow
Type Type of login:
fe FLOGI, fabric login to fabric F_Port.
ff PLOGI, process login to specific N_Ports or well-known address,
such as name server.
fd FDISC, virtual N_Port login.
PID The port's 24-bit D_ID.
WWN The port's world wide name.
credit The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for
FLOGIs and EE (end-to-end) credit for PLOGIs.
df_sz The default frame size for this login.
cos Class of services supported. This can be a combination of the following
bits:
4 Class of service includes class 2.
8 Class of service includes class 3.
slotnumber For bladed systems only, specify the slot number of the port to
be configured, followed by a slash (/).
portnumber Specify a port number to be configured, relative to its slot for
bladed systems. Use switchShow to display a list of valid
ports.