HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

448 Fabric OS commands
Restores the port configuration to default values.
Synopsis
portcfgdefault [slotnumber/]portnumber
Availability
admin
Description
Use this command to reset any special configuration values on a port to their factory defaults. You can
view the current port configuration using the portCfgShow command.
Operands
This command has the following operands:
Examples
To reset a port to factory defaults:
See also
portCfgEPort
portCfgGPort
portCfgLongDistance
portCfgLPort
portCfgPersistentDisable
portCfgPersistentEnable
portCfgShow
portCfgSpeed
portCfgTrunkPort
portCfgDefault
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed
systems. Use switchShow to list valid ports.
switch:admin> portcfgdefault 1/3