HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

442 Fabric OS commands
Displays port-based filter CAM utilization.
Synopsis
portcamshow [slotnumber/][portnumber]
Availability
all users
Description
Use this command to display the current filter CAM utilization of all ports or one port specified at input.
The following information is displayed:
Operands
This command has the following operands:
portCamShow
SID used Total number of CAM entries used by this port. Note that each CAM
entry (either SID or DID CAM) can be shared among ports in the same
quad.
DID used Total number of CAM entries used by this port. Note that each CAM
entry (either SID or DID CAM) can be shared among ports in the same
quad.
SID entries All existing source ID entries within the CAM per quad. Note that each
CAM entry (either SID or DID CAM) can be shared among ports in the
same quad.
DID entries All existing destination ID entries within the CAM per quad. Note that
each CAM entry (either SID or DID CAM) can be among ports in the
same quad.
SID free Total number of free SID CAM entries per quad.
DID free Total number of free DID CAM entries per quad.
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed
systems. Use switchShow to list valid ports. This operand is optional;
if omitted, information for all ports is displayed.