HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

44 Fabric OS commands
Deletes a zone alias.
Synopsis
alidelete “aliName“
Availability
admin
NOTE: This command requires HP Advanced Zoning license, which is included within the Base
Configuration Services and bundled with each B-series switch.
Description
Use this command to delete a zone alias.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to flash memory using the cfgSave command. For the change to become effective, an
appropriate zone configuration must be enabled using the cfgEnable command.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following operand:
Examples
To delete the zone alias array2:
See also
aliAdd
aliCreate
aliRemove
aliShow
aliDelete
“aliName” Specify the name of zone alias to be deleted. This
operand must be enclosed in quotation marks. This
operand is required.
switch:admin> alidelete "array2"