HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 439
Displays the arbitrated loop physical addresses (AL_PAs) of devices attached to a port.
Synopsis
portalpashow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display the device AL_PAs present in a port and whether these devices are public or
private. If the port is not an active FL_Port or if it does not have any AL_PA, this command displays an
error.
Operands
This command has the following operands:
Examples
To display the AL_PAs of a port:
See also
switchShow
portAlpaShow
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems.
Use switchShow to list valid ports.
switch:user> portalpashow 4/14
AL_PA type AL_PA type AL_PA type
0xe2 public 0xe4 public