HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 377
Displays local Name Server (NS) information.
Synopsis
nsshow [-r -t]
Availability
all users
Description
Use this command to display local NS information about devices connected to this switch.
The following message is displayed if there is no information in this switch:
There is no entry in the Local Name Server
The nsAllShow command displays information from all switches.
Each line of output displays:
There might be additional lines if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
• FC4s supported
• IP address
• IPA
• Port and node symbolic names
• Fabric Port Name. This is the WWN of the port on the switch to which the device is physically
connected.
• Hard address and/or port IP address
nsShow
Type U for unknown, N for N_Port, NL for NL_Port.
PID 24-bit Fibre Channel address.
COS List of classes of service supported by device.
PortName Device port world wide name (WWN).
NodeName Device node WWN.
TTL Time-to-live, in seconds, for cached entries or NA (not
applicable) if the entry is local. This displays if the -r option is
given.
SCR State change registration of the device. This displays if the -r
option is given.
Device type Device type if -t is given.
Permanent Port Name Physical N_Port or NL_Port WWN.