HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

362 Fabric OS commands
Resets FSPF interface counters.
Synopsis
nbrstatsclear [slotnumber/][portnumber]
Availability
admin
Description
Use this command to reset the counters of FSPF frames transmitted and received on each inter-switch link
(ISL) or a specific ISL. These counters display using the using the interfaceShow command.
Use this command without operands to reset counters on all interfaces.
Operands
This command has the following operands:
When this command is specified with no operand, the statistics are cleared for all interfaces.
Examples
To reset the counters on a port:
nbrStatsClear
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems.
Use switchShow to list valid ports. This operand is optional; if omitted,
FSPF statistics are reset.
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Interface 0 data structure:
nghbP = 0x1004ce68
ifNo = 0
masterPort = 0 (self)
defaultCost = 500
cost = 500
delay = 1
(continued on next page)