HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 361
Displays FSPF neighbor's state.
Synopsis
nbrstateshow [slotnumber/][portnumber]
Availability
all users
Description
Use this command to display information about neighbors to the local switch, or information about a
specific neighbor if a port number is supplied. FSPF defines a neighbor as a remote E_Port interface that
is directly attached to the local switch. The following fields display:
Operands
This command has the following optional operands:
Examples
To display information about switches directly connected to the local switch:
See also
interfaceShow
nbrStateShow
Local Domain ID Domain number of local switch.
Local Port E_Port (interface) on local switch.
Domain Domain number of remote switch.
Remote Port E_Port (interface) on remote switch.
State State of the neighbor. The E_Port is used to route frames
only if the neighbor is in NB_ST_FULL state.
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems.
Use switchShow to list valid ports. If this operand is omitted, all
neighbor states are displayed.
switch:user> nbrstateshow 2/0
Local Domain ID: 1
Local Port Domain Remote Port State
-------------------------------------------------------
16 2 48 NB_ST_FULL