HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 311
Turns off the in-order delivery (IOD) option.
Synopsis
iodreset
Availability
admin
Description
Use this command to turn off the IOD option. The IOD option is turned off by default; however, if the IOD
option was turned on using iodSet, this command can be used to turn it off again. Disabling IOD allows
fast re-routing after a fabric topology change.
This command might cause out-of-order delivery of frames during fabric topology changes.
Operands
none
Examples
To turn off the IOD option:
See also
iodSet
iodShow
iodReset
switch:admin> iodreset
switch:admin> iodshow
IOD is not set