HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 307
Operands
This command has the following operands:
When no slot number and port number are specified, this command displays the interface information for
all ports on the switch (including non-E_Ports).
Examples
To display FSPF interface information:
slotnumber For bladed systems only, specify the slot number of the port to
display, followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed
systems. Use switchShow to list valid ports. This operand is
optional; if omitted, the interface information for all ports is
displayed.
switch:user> interfaceshow 1/4
idbP = 0x1008b3d0
Interface 4 data structure:
nghbP = 0x1008c668
ifNo = 4
masterPort = 4 (self)
defaultCost = 500
cost = 500
delay = 1
lastScn = 16
lastScnTime = Apr 02 20:01:44.458
upCount = 2
lastUpTime = Apr 02 20:01:44.458
downCount = 1
lastDownTime = Apr 02 20:01:09.050
downReason = 2
iState = UP
Neighbor 4 data structure:
(continued on next page)