HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 261
Displays and modifies the Fabric Watch configuration.
Synopsis
fwconfigure [--enable --port portNumber] | [--disable --port portNumber]
Availability
admin
NOTE: This command requires a Fabric Watch license.
Description
Use this command to display and modify threshold information for the Fabric Watch configuration. Switch
elements monitored by Fabric Watch are divided into classes, which are further divided into areas. Each
area can include multiple thresholds. In addition, the command can be used to disable or enable all
thresholds associated with a given port.
The Fabric Watch classes and areas are provided in Table 13.
NOTE: Not all platforms support fans or power supplies. If you attempt to configure values for these
items, an ERROR: No threshold available error message is displayed.
fwConfigure
Table 13 fwConfigure fabric watch classes and areas
Class Area
Environmental Temperature
Fan
Power Supply
SFP Temperature
RXP
TXP
Current
Voltage