HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 257
Enables or disables alarms for Fabric Watch.
Synopsis
fwalarmsfilterset [mode]
Availability
admin
NOTE: This command requires a Fabric Watch license.
Description
Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all
non-environment class alarms are suppressed. By turning on the alarms, all class alarms are generated.
Operands
This command has the following operand:
Examples
To enable alarms in Fabric Watch:
See also
fwAlarmsFilterShow
fwAlarmsFilterSet
mode Specify 1 to enable the alarms, 0 to disable the alarms. If no
operand is specified, the default value is 0 (alarms deactivated). This
operand is optional.
switch:admin> fwalarmsfilterset
Committing configuration...done.
FW: Alarms are disabled
switch:admin> fwalarmsfilterset 1
Committing configuration...done.
FW: Alarms are enabled