HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

252 Fabric OS commands
Interactive interface to replace a field replaceable unit (FRU).
Synopsis
frureplace FRU
Availability
admin
Description
Use this command to guide the user in replacing an FRU. The command automatically performs the
necessary backup and restore (steps to accommodate the replacement).
Operands
This the following operand is required:
Examples
To replace the world wide name card:
fruReplace
FRU Specify the type of hardware component being replaced. WWN is
the only supported value; it specifies the replacement of the
WWN card.
switch:admin> frureplace wwn
This is the WWN card hot swap interface.
Continuing from this point will require
the whole process to be completed.
If this process is not complete due to a
power cycle, or CP failover, please follow
the recovery procedure in
Core Switch WWN Card Removal and
Replacement document.
Do you wish to continue [y/n]? y
Backing up WWN card data, please
wait about 25 seconds for further
instruction.
Please install the new FRU now.
(continued on next page)