HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

248 Fabric OS commands
Displays the Fabric OS versions on both partitions of the local and remote CPs.
Synopsis
firmwareshow
Availability
admin
Description
Use this command to display the Fabric OS versions on primary and secondary partitions. For systems
with multiple control processor (CP) cards, this command displays this information for both local and
remote CPs.
Operands
none
Examples
To display the firmware version of a single-CP system:
To display the firmware version of a dual-CP system:
See also
firmwareDownload
firmwareDownloadStatus
firmwareShow
switch:admin> firmwareshow
Primary partition: v5.0.1
Secondary Partition: v5.0.1
switch:admin> firmwareshow
Local CP (Slot 5, CP 1): Active
Primary partition: v5.0.1
Secondary Partition: v5.0.1
Remote CP (Slot 6, CP 0): Standby
Primary partition: v5.0.1
Secondary Partition: v5.0.1
Note: If Local CP and Remote CP have different versions
of firmware, please retry firmwaredownload command.