HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 245
Displays the status of a firmware download.
Synopsis
firmwaredownloadstatus
Availability
admin
Description
Use this command to display an event log that records the progress and status of the current
firmwareDownload command. The event log is created by the current firmwareDownload command
and is kept until another firmwareDownload command is issued. There is a timestamp associated with
each event.
In systems with two control processor (CP) cards, when firmwareDownloadStatus is run, the event
logs whether the two CPs are synchronized. The command can be run from either CP.
Operands
none
Examples
To display the status of a firmware download:
firmwareDownloadStatus
switch:admin> firmwaredownloadstatus
[1]: Tue Jan 18 13:21:25 2004
cp1: Firmwaredownload has started on Standby CP. This step will take
up to 30 minutes.
[1]: Tue Jan 18 13:21:35 2004
cp1: Firmwaredownload has completed successfully on Standby CP.
[2]: Tue Jan 18 13:21:37 2004
cp1: Standby CP reboots.
[3]: Tue Jan 18 13:24:44 2004
cp1: Standby CP boots up.
[4]: Tue Jan 18 13:24:45 2004
cp1: Standby CP booted up with new firmware.
[5]: Tue Jan 18 13:24:51 2004
cp0: Active CP forced failover succeeded. Now this CP is becoming
Active.
(coninued on next page)