HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

232 Fabric OS commands
0x03 Input unit record, if it is an storage port;
otherwise, a reserved field for a channel port.
0x04 Output unit, if it is an storage port; otherwise,
a reserved field for a channel port
0x05 Reserved field for a channel port.
0x06 Controller, if it is an storage port; otherwise, a
reserved field for a channel port.
0x07 Terminal - Full screen if it is an storage port;
otherwise, a reserved field for a channel port.
0x08 Terminal - Line mode if it is an storage port;
otherwise, an emulated control unit support
only.
0x09 Reserved.
0x10 Switch, if it is a switch device; otherwise,
reserved.
0x0b-0xff Reserved.
Byte CC 0x00 If storage CU port has registered with the
switch.
0xID CHIPID if channel port has registered with the
switch.
0xPN If switch has registered with the channel, PN
represents the FL port number.
Part Number Displays the switch chassis part number.
PID Displays the 24-bit Fibre Channel port address in 0xDDAAPP format.
DD is Domain ID. AA is Area ID. PP is AL_PA ID.
Plant of Manufacture Displays the manufacturer plant name or code.
Port Physical port number
Port Status Displays the status of the port:
• Link degraded but operational
• Link not operational
Port Type Displays the port type:
• U is unknown.
• N is N_Port.
• NL is NL_Port.
Protocol Displays whether the traffic is using FICON or FCP.
Registered Node WWN Displays the device's node world wide name associated with the
device HBA.
Registered Port WWN Displays the device's channel or storage CU port world wide name
associated with the device HBA.
Sequence Number Displays the sequence number of the self describing node.
Serial Number Displays the switch serial number.
Switch node WWN Displays the switch node world wide name.
Switch Port WWN Displays the switch port world wide name.
Switch WWN Displays the switch WWN.
Tag Displays the physical identifier for the self-describing node interface.
TS Format Displays the Time Server format.