HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

218 Fabric OS commands
Displays the Fibre Channel Protocol (FCP) probe information.
Synopsis
fcpprobeshow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display the FCP probing information for the devices attached to the specified F_Port
or FL_Port. This information includes the number of successful logins and SCSI INQUIRY commands sent
over this port and a list of the attached devices.
Operands
This command has the following operands:
Examples
To display the FCP probe information:
fcpProbeShow
slotnumber For bladed systems only, specify the slot number of the port to
display, followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed
systems. Use switchShow to list valid ports. This operand is
required.
switch:admin> fcpprobeshow 4/4
port 52 is L-Port and it is online.
nodes probed: 2
successful PLOGIs: 2
successful PRLIs: 2
successful INQUIRies: 2
successful LOGOs: 2
outstanding IUs: 0
probing state: 3
probing TOV: 0
probing count: 0
probing next: 0
pmap: 0x00000000, 0x00000000, 0x00000000, 0x00000010
update map: 0x00000000, 0x00000000, 0x00000000, 0x00000010
list of devices(may include old devices on the loop):
0x2b4e2: IBM DDYF-T09170R F60N
0x2b4e4: IBM DDYF-T09170R F60N