HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 209
Displays Fabric Assist zone information.
Synopsis
fazoneshow [“pattern“[, transflag]]
Availability
all users
Description
Use this command to display Fabric Assist zone information. Specifying this command with no
parameters or with the second parameter set to 0 displays all Fabric Assist zone configuration
information for both defined and effective configurations. Defined configuration information is shown
from the transaction buffer. See the cfgShow command for a description of this display.
If a parameter is specified, it is used as a pattern to match Fabric Assist zone names, and those that
match in the defined configuration are displayed.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
This command has the following optional operands:
Examples
To display all Fabric Assist zones beginning with the letters A through C:
See also
faZoneAdd
faZoneCreate
faZoneDelete
faZoneRemove
faZoneShow
pattern Specify a value to search for the name of a Fabric Assist zone.
This can be any POSIX-style expression. Patterns can contain:
• Question mark (?), which matches any single character
• Asterisk (*), which matches any string of characters
• Ranges, which match any character within the range:
for example, [0-9] or [a-f]
transflag Specify 0 to display the information from the current transaction,
or specify 1 to display information from the original buffer. This
operand must be preceded by a pattern. If this operand is
omitted, the value defaults to 0.
switch:admin> fazoneshow "[A-C]*"
fazone: Blue_fazone
1,1; array1; 1,2; array2