HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

206 Fabric OS commands
Deletes a Fabric Assist zone.
Synopsis
fazonedelete “fazonename”
Availability
admin
Description
Use this command to delete an existing Fabric Assist mode zone on a fabric.
This command does not change the defined configuration (which you can view using the cfgShow
command). For the change to become effective, an appropriate Fabric Assist zone configuration must be
enabled using the cfgEnable command. For the change to be preserved across switch reboots, it must
be saved to flash memory using the cfgSave command.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
The following operand is required:
Examples
To delete a Fabric Assist zone:
See also
faZoneAdd
faZoneCreate
faZoneRemove
faZoneShow
faZoneDelete
fazonename Specify the name of the zone to be deleted, in quotation marks.
switch:admin> fazonedelete "Blue_fazone"