HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

200 Fabric OS commands
Displays fan status and speed.
Synopsis
fanshow
Availability
all users
Description
Use this command to display the current status and speed of each fan in the system.
Fan status is displayed as:
NOTE: The output from this command varies depending on switch type and number of fans present.
Operands
none
Examples
To display information on the fans in the system:
See also
chassisShow
fanDisable
fanEnable
psShow
fanShow
OK Fan is functioning correctly.
absent Fan is not present.
below minimum Fan is present but rotating too slowly or stopped.
above minimum Fan is rotating too quickly.
unknown Unknown fan unit installed.
faulty Fan has exceeded hardware tolerance and has stopped. In this
case, the last known fan speed is displayed.
switch:admin> fanshow
Fan #1 is OK, speed is 2721 RPM
Fan #2 is OK, speed is 2657 RPM
Fan #3 is OK, speed is 2700 RPM