HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

198 Fabric OS commands
Disables a fan unit.
Synopsis
fandisable unit
Availability
admin
Description
Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTE: This command is not available on nonbladed systems except for the HP StorageWorks SAN
Switch 4/32.
Operands
This command has the following operand:
Examples
To disable a fan unit:
See also
fanEnable
fanShow
fanDisable
unit Specify the fan's unit number to disable. View the fan unit
numbers using the fanShow command. This operand is
required.
switch:admin> fandisable 1
Fan unit 1 has been disabled