HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

196 Fabric OS commands
Displays the fabric switch state structure information.
Synopsis
fabswitchshow
Availability
all users
Description
Use this command to display the fabric switch state structure information.
IMPORTANT: This command is provided strictly for debugging purposes; it is not intended as a user
command.
Operands
none
Examples
To display fabric switch state structure:
fabSwitchShow
!
switch:admin> fabswitchshow
Fabric Switch State Structure Information
=========================================
State: D0
Stage: warm done
Rdi Receive Timer: 0x10069400, IDLE STATE
Unconfirmed Sw Timer: 0x10069508, IDLE STATE
NTP Timer: 0x100695b8, IDLE STATE
ME Timer: 0x10069610, IDLE STATE
Principal Domain: 2
Upstream Port: 64
Principal Wwn: 10:00:00:60:69:80:06:ce
Principal Priority: 0x2
Flags: 0x40
me retry count: 0
inq_sem count: 1
dbg_sem count: 1
ha efp count: 0
fab_q current count: 0
fab_q high water: 8
fab_q age: 0 (sec)
(continued on next page)