HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

176 Fabric OS commands
Displays the error log messages, with pagination.
Synopsis
errshow [-s switch_instance] [-r]
Availability
all users
Description
Use this command to display external error log messages for all switch instances and the chassis, one at
a time. The -r operand displays the messages in a reversed order. The following information displays in
each message:
Operands
This command has the following optional operands:
errShow
Start delimiter Delimiter string for the start of a message.
Timestamp Timestamp for the message.
Message ID Message identifier.
External sequence
number
Sequence number for the message
Security audit flag Security audit logged. AUDIT displays in the field.
Severity Severity of the message. Valid values include INFO, WARNING,
ERROR, and CRITICAL.
Switch name Switch name for the generator of this message, or “chassis”.
Message Message body.
End delimiter Delimiter string for the end of a message.
-s Specifies to display messages only from one switch instance.
Valid values are 0 or 1. If this operand is omitted, messages
from all switch instances are displayed.
-r Specifies to display messages in reversed order. If this operand
is omitted, the messages display in the normal order.