HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

154 Fabric OS commands
Sets diagnostic script parameters.
Synopsis
diagsetcycle script [-show | -default | [-keyword value]]
Availability
admin
Description
Use this command to provide an interactive method to update diagnostic command parameters. If only
script is specified, the command displays all configuration variables used by the specified script and enters
an interactive session. If all parameters are used, variables can be updated manually.
In interactive mode, the current value, default value, and description of purpose of the variable are
displayed for each variable. If no new value is specified, the current value is left unchanged. If a new
value is entered, its value is updated and stored in the configuration database for that blade type. This
command does not require a reboot to take effect.
NOTE: HP StorageWorks recommends running the burninErrClear command prior to running
diagSetBurnin and diagSetCycle.
Operands
This command has the following operands:
diagSetCycle
script Specify a script in which you want to change parameters.
-show Specify this operand to display the parameters for the specified
diagnostic script.
-default Specify this operand to set the script parameters to default
values.
-keyword value The script parameters can be updated noninteractively using this
style of option list. value is the keyword to update; the value
should be specified manually in this case.