HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

128 Fabric OS commands
System Services
Table 9 lists the system services fields and their settings.
Descriptions of the system service (setting) fields are as follows:
Portlog Events Enable
Port events can be disabled from logging. The default is enabled (on). When disabled, this event is not
logged by the port log.
Application Attributes
Application attributes HTTP, SNMP, and RPCd are configurable; by default, all three attributes are
enabled. See Table 10 for the application attributes that can be changed.
Table 9 Configure command system services fields
Field Default Range
rstatd Off On/Off
rusersd Off On/Off
telnetd On On/Off
rstatd Dynamically enables or disables a server that returns system
operation information through remote procedure calls (RPC). The
protocol provides for a wide range of system statistics.
The retrieval of this information is supported by a number of
operating systems that support RPC. Most UNIX-based systems
(HP-UX, Irix, Linux, Solaris, and so on.) use the RUP and
RSYSINFO commands to retrieve the information. See your local
system documentation for the appropriate usage of the these or
equivalent commands.
rusersd Dynamically enables or disables a server that returns information
about the user logged into the system through remote procedure
calls (RPC). The information returned includes user login name,
system name, login protocol or type, login time, idle time, and
remote login location (if applicable).
The retrieval of this information is supported by a number of
operating systems that support RPC. On most UNIX-based
systems (HP-UX, Irix, Linux, Solaris, and so on.) the command to
retrieve the information is rusers. See your local system
documentation for the appropriate usage of this or an equivalent
command.
telnetd Used to enable or disable the telnet interface to a switch,
including sectelnet. If you are using SSH to manage a switch,
you can disable the telnet interface for greater security. The
default value is on (telnet enabled).
Table 10 Configurable application attributes
Application File Type Default Range
SSL Certificate File string not set varies
CA Certificate File string not set varies
Length of crypto key number 128 40, 56, 128