HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 101
switch:admin> chassisconfig
Current Option: 1
All Supported Options (With Blade ID 5 on slots 5-6)
----------------------------------------------------
Option 1: One 128-port switch
(Blade ID 4, 17 on slots 1-4, 7-10, Blade ID 5, 16 on slots 5-6)
Option 2: Two 64-port switches
(Blade ID 4 on slots 1-4, 7-10, Blade ID 5 on slots 5-6)
Option 3: Two 64-port switches
(Blade ID 4 on slots 1-4, ID 2 on slots 7-10, Blade ID 5 on slots 5-6)
Option 4: Two 64-port switches
(Blade ID 2 on slots 1-4, ID 4 on slots 7-10, Blade ID 5 on slots 5-6)
Please use slotshow to see the Blade IDs of the SW and CP blades and
check with
customer support on the list of all available SW and CP Blade IDs and
their
marketing names.
switch:admin> chassisconfig 2
This will reboot all the CPs and the configuration data will be restored
to
factory defaults if moved between single and multiple domains. This
includes,
but are not limited to, port swap, routing, zoning, performance
monitoring, port
config, fabric watch, management server, time server, snmp, security,
fabric and
other FabOs configuration parameters.
Traffic will be disrupted and both the CPs comes up and will vary in the
number
of switches and the Blade IDs they recognize based on the configuration
selected. Some configuration values are applicable to both single-domain
and
multiple-domain switches, and are therefore not modified. (Examples:
licenses,
IP addresses, host and switch names, SSL certificates, PKI
certificates.) Please
read the man page for further information.
(continued on next page)