HP StorageWorks Fabric OS 5.x Advanced Web Tools Administrator Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x Advanced Web Tools administrator guide 97
3. From the Name drop-down list, select a configuration to be analyzed.
4. Click Analyze Config.
A dialog box opens, asking whether you want to refresh the fabric before running the analysis.
5. Click Yes or No.
The configuration analysis window opens.
Displaying Initiator/Target Accessibility Matrix
The Initiator/Target Accessibility Matrix shows a list of initiators and a list of targets and indicates which
initiator can access which target, as shown in Figure 31.
1. Launch the Zone Admin module as described on page 83.
2. Click the Config tab.
3. Select a configuration to be analyzed for device accessibility from the Name drop-down list.
4. Click Device Accessibility.
The Initiator/Target Accessibility Matrix for Config- Device Selection dialog box opens.
5. Select devices you want displayed in the accessibility matrix; select the radio button to select all
devices in the fabric or to select a subset of the devices.
If you select a subset, you must click the devices from the Select Devices list and click Add to move
them to the Evaluate for Accessibility list.
6. Click OK.
The Initiator/Target Accessibility Matrix opens. You can mouse over a target to display the symbolic
name of the device. You can also right-click the device nodes and click View Device Detail to display
detailed information about the selected device.
Figure 31 Initiator/Target Accessibility Matrix