HP StorageWorks Fabric OS 5.x Advanced Web Tools Administrator Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x Advanced Web Tools administrator guide 137
5. Optional: For the LUN per port graphs, enter a LUN number, in hexadecimal:
• For the 4Gb SAN Switch for HP p-Class BladeSystem and SAN Switch 4/32, you can enter up to
eight LUN masks.
• For the 4/256 SAN Director, you can enter up to four LUN masks.
• For all other switches running Fabric OS 4.x or 5.x, you can enter up to two LUN masks.
• For switches running Fabric OS 3.x, you can enter up to three LUN masks.
6. Click OK.
The selected graph is displayed in the canvas.
Creating an AL_PA error graph
The AL_PA Error graph displays CRC errors for a given port and a given AL_PA. The AL_PA Error graph is
not supported on the 4Gb SAN Switch for HP p-Class BladeSystem and SAN Switch 4/32.
1. Launch the Performance Monitor module as described on page 132.
2. Select Performance Graphs > Advanced Monitoring > ALPA Error.
The ALPA Error Setup dialog box opens (see Figure 56).
3. Navigate to a
switch > slot > port in the Slot/Port or Alpa Selection List.
4. Click the port or Alpha from the Slot/Port or Alpha Selection List or an AL_PA from the Slot/Port
Selection List, and drag it into the Enter/drag slot,port box.
You can also enter the slot and port number in the format slot,port.
5. Click OK.
The AL_PA error graph is displayed on the canvas.
Figure 56 Creating an ALPA error graph
Managing performance graphs
This section provides the following procedures for managing performance graphs:
• Saving graphs to a canvas, page 137
• Adding a graph to an existing canvas, page 138
• Printing graphs, page 138
• Modifying an existing graph, page 139
Saving graphs to a canvas
Saving graphs is especially useful when you create customized graphs and do not want to re-create them
every time you access the Performance Monitor module.
When you save graphs, you must save them to a canvas. The following procedure describes how to save
graphs to a new canvas.