HP StorageWorks Fabric OS 5.x Advanced Web Tools Administrator Guide (AA-RVHXB-TE, September 2005)

114 Administering FICON CUP fabrics
Figure 42 FICON CUP management
Configuring FMS parameters
FMS parameters control the behavior of the switch with respect to CUP itself, as well as the behavior of
other management interfaces (director console, alternate managers). You can configure FMS parameters
for a switch only after FMS mode is enabled on the switch. All FMS parameter settings are persistent
across switch power cycles. There are six FMS parameters, as described in Table 10.