HP StorageWorks Fabric OS 5.0.5c Release Notes (AA-RW1WE-TE, February 2007)

Prerequisites and requirements
Table 1 summarizes current p roducts running Fabric OS 5.0.5c firmware. The table lists
the earliest recommended software versions. However, HP recommends using the latest
supported software release versions to get the most benefit from the SA N.
Table 1 Current supported Fabric OS versions
Model Earliest version Recommended version
Brocade 4Gb SAN Switch for HP
c-Class BladeSystem
5.0.5 5.0.5c
Brocade 4Gb SAN Switch for HP
p-Class BladeSystem
5.0.0 5.0.5c
HP StorageWorks Core Switch 2/64
4.1.0
5.0.5c
For a list of retire d products, visit the following HP web site:
h
ttp://h18004.ww w1.hp.com/storage/retiredp rod
ucts.html?jumpid=reg_R1002_USEN
Firmw ar e upgrade instructions
To access the latest Fabric OS 5.0.5c firmware, configuration files and M IB files go to
the following HP web site:
h
ttp://www.hp.com/go/san
Navigat
e to the appropriate product under the B-Series Switches section.
IMPORTANT:
HP does not support upgrading fr om more than two pre v iou s releases.
Documentation
This release of Fabric OS is suppo rted by the Fabric OS 5.0.1 d o cumentation set.
Access the most recent Fabric OS 5.0.1 documentation:
h
ttp://www.hp.com/go/san
4