HP StorageWorks Fabric OS 5.0.5c Release Notes (AA-RW1WE-TE, February 2007)

Zoning
With AUD IT logging enabled, while performing zoning changes via CLI, an additional
audit log from HTTP may also appear along with the audit logs from zoning. This
message does not a
lways appear, and when it does, it represents redundant reporting
by the CAL layer.
Fabric Manager firmware download
For an embedded switch running Fabric OS 5.0.2 and 5.0.3 using the small firmware
file format, Fabric Manager (FM) version 5.0 supports firmware download using the
external ftp server to download the firmware to the sw itch. In Fabric Manager’s Options
dialog, set the FTP server setting to the external option. In the Firmware Download
dialog, select the external ftp server to download. Fabric Manager does not support
importing the image into the Fabric Manager firmware repository
FC4-16 and FC4-32 blades
If you are pl
anning to install FC4-16 or FC4-32 blades in the Core Switch 2/64, you
must upgrad
e the firmware on both CPs before you install the blades.
FICON/CUP support
HP does not support IBM Fibre Connections (FICON) in this Fabric OS 5.0.5c firmware
release. See h
ttp://www.hp.com for a list of currently supported features.
NPIV upda
te
HP does no
t currently support N-Port ID Virtualization (NPIV) in this Fabric OS 5.0.5c
firmware release. See h
ttp://www.hp.com for a list of currently supported features.
Unsuppor ted commands
The slotOff and slotOn commands are now obsolete; use slotPowerOff and
slotPowerOn instead. The portLogPortShow command is also now obsolete.
RSCN suppression
This release of Fabric OS features RSCN suppression: the ability to control RSCNs
originating from hosts on a port-by-port basis.
Enhanced RAS log messages
New with Fabric OS v5.0.1 are Zoning Audit messages. These messages record
information about the type of zoning change made (including such tasks as cfgenable
10