HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

69
5
SPECIFICATIONS
Switch Components
The HP StorageWorks Core Switch 2/64 consists of the following
components:
• A 14U chassis, designed to be mounted in a standard 19-inch rack. Two
HP StorageWorks Core Switch 2/64 switches may be mounted in a
standard 42U rack.
• 16-port cards in configurations of 2 to 8 cards per chassis, with 16
optical ports per card, compatible with SFPs.
• Two CP cards, each with:
– One modem serial port with a DB-9 connector (full RS-232).
– One terminal serial port with a DB-9 connector (RS-232 signal
subset).
– One IEEE compliant RJ-45 connector or use with a 10/100 Mbps
Ethernet connection.
– A real-time clock (RTC) with a 10-year battery and 56 bytes of
NVRAM.
• Four power supplies with built-in fans. The power supplies plug into
internal blind-mate connectors when installed in the chassis.
• Two AC power inlet connectors with AC power switches (power panel).