HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

68 getting started and general reference guide
Cross Port Test
crossPortTest
Checks all switch paths. Frames
transmitted by port M are
looped back via external cable
and received at port N. Run
offline or online.
Spin Silk Test
spinSilk
Checks all switch paths at the
maximum speed of 1 Gbps.
Frames transmitted by port M
are looped back via external
cables and when received by
port N are sent again by port M
in an external loop. Run offline.
SRAM Data
Retention Test
sramRetentionTest
Verifies that data written into
ASIC memories is retained.
Runs offline.
CMem Data
Retention Test
CmemRetentionTest
Verifies that data written into
ASIC SRAMs is retained. Runs
offline.
Switch Online
switchEnable
Returns switch to online state.
Table 9. Diagnostic Test Commands and Descriptions
Test Command Description