HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

Installing the Switch 27
13.From the front side of the rack, reattach the flanges to the rear-mount
brackets with the four #10-32 pan-head screws you removed earlier from
the rear mounting bracket sets (see Figure 17). Do not tighten the screws.
Figure 17. Reattaching the Flanges to the Rear Mounting Brackets
Rear Mounting
#10-32 Pan-Head
Screws (2x set)
Bracket Set
(Flange and
Rear-Mount
Bracket)
Front of Rack