HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

Installing the Switch 25
11.From the rear side of the rack, reattach the following items to the chassis:
a. Using the seven #10-32 flat-head screws removed earlier, reattach the
right front mounting bracket to the chassis (see Figure 15).
Figure 15. Reattaching the Left and Right Front Mounting Bracket
b. Using the ten #10-32 flat-head screws removed earlier, reattach the
left front mounting bracket to the chassis (see Figure 15).
#10-32 Flat-Head
Screws (17x)
Front Mounting
Brackets (2x)
Rear of Rack