HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

Installing the Switch 23

8. On the left and right rear rack columns, install a Tinnerman nut two holes

above the top screw of the rail assembly and another nut 34 holes above

the top screw (see Figure 13). For an HP Rosebowl II rack, use M5 U-type

Tinnerman nuts. For a Compaq/Rittal rack, use #10-32 Tinnerman nuts.

Figure 13. Installing Tinnerman Nuts

Bottom of Rail Assemblies (2x)

#10-32

Upper Pair

of M5 U-Type

Lower Pair

of M5 U-Type

(between 1/2 inch spaced holes)

Compaq/Rittal

Rack

Tinnerman Nuts

HP Rosebowl II

33 Holes Between

the Top Tinnerman

Nut and the Top

Rail Assembly

Screw

Rear of Rack

Rack