HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

22 getting started and general reference guide
7. From the front side of the rack, attach each flange to the rack with four
screws, two per flange. Install the bottom flange screw 30 holes above
the top rail assembly screw and then install the top flange screw two holes
above the bottom flange screw (see Figure 12). For an HP Rosebowl II
rack, use 1/4-20 x .5” Phillips pan-head screws with integrated lock
washers. For a Compaq/Rittal rack, use 1/4-20 x .5” Phillips pan-head
screws with integrated lock washers with a .375” square mounting hole
between the screw and the rack column.
Figure 12. Attaching the Flange to the Rack
Compaq/Rittal
Rack
1/4-20 Phillips
.375” Square
Pan-Head
Screws (4x)
Mounting Hole
HP Rosebowl II Rack
Flange (2x)
1/4-20 Phillips
Pan-Head
Screws (4x)
Front of Rack
29 Holes Between
the Bottom Flange
Screw and the Top
Rail Assembly
Screw