HP StorageWorks Core Switch 2/64 Getting Started & General Reference Guide

18 getting started and general reference guide
c. Remove the two front mounting brackets by removing the ten #10-32
flat-head screws on the left bracket and the seven #10-32 flat-head
screws on the right bracket (see Figure 8). Note the difference between
the left and right front mounting brackets and save the screws to
reattach the brackets later.
Figure 8. Removing the Left and Right Front Mounting Brackets
#10-32 Flat-Head
Screws (17x)
Front Mounting
Brackets (2x)