HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6005
8843
Suspend(Pairsplit-r)
operation failed because
specified volume or other
volume in thesamegroup is
not
in permissible status.
The operation failed,
because of one of the
following reasons:
1.
The specified volume is
simplex.
2.
There is no duplex or
duplex-pending volume
in the
group.
3.
Either the specified
volume or another
volume in the same
group is suspended.
Verify the status, and
retry the operation.
i
4
6005
8844
Suspend(Pairsplit-r)
operation failed because
specified volume or other
volume in thesamegroup is
in
status transition.
The operation failed,
because of one of the
following reasons:
1.
The specified volume or
another volume in the
same group is deleting.
2.
The specified volume
or
another volume
in thesamegroup is
suspending. Wait for
the change in status
to be
completed, then
retry the operation.
i
4
6005
8845
Preset Suspension is effective
in the
CT Group.
Canc
el the
preset
sus
pensioninthe CT group,
the
n
retry the operation.
i
4
6005 8846
An internal error occurred.
Please call technical
support.
E
4
6005
8847
An internal error occurred.
Please call technical
support.
E
4
6
005
8848
Please wait a few minutes
and
retry the Suspend Pair
(Pairsplit-r) operation.
The suspend pair (Pairsplit-r)
operation failed. A few
minutes later, refresh the
screen, confirm if the
specified volumes are in the
permissible status, then retry
the operation.
i
4
6005
8849
Specified volume is not
part of Continuous Access
pair (Not in Duplex (PAIR),
Pending (COPY), Suspend
(PSUS) state).
The specified volume is
not
part of a Continuous
Access pair. Please check
the volume.
i
4
6005 8850
Invalid RCU serial number,
SSID, Link Address or
Controller ID.
Check the serial number,
SSID, link address and
controller ID of the RCU,
and
set the correct value.
Then retry the operation.
If thesameerror occurs,
contact technical support.
E
4
6005 8851
Invalid R-VOL.
Please check the R-VOL
status.
E
4
XP24000 Remote Web Console Error Codes
211