HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
3010
65647
Reset operation cannot
be
performed because
the
number of volumes
that can be created in the
parity group exceeds the
maximum.
Reduce the number of
volumes in the parity group,
then
retry the operation.
W
5
3010 69029
If the unit of display is
changed, the status of the
setting will return to the
status set before. Do you
want to continue?
To continue processing, click
[OK]. To stop processing,
click [Cancel].
W
5
3010 69030
The information that is
under
setup is not applied
to thedeviceyet. The
information under setup
will be cleared before the
Format processing. Do you
want to continue?
To continue processing, click
[OK]. To stop processing,
click [Cancel].
W
5
3010 69031
The volume in the P arity
Group set in the following
window is to be processed.
Do
you want to continue?
To continue processing, click
[OK]. To stop processing,
click [Cancel].
W
5
Table 35 Error Codes — Part Code 3110
Part
Code
Error
Number
Error Message
Recomm
ended Action
Severit
y
Level
Failur
e
Level
3110 55501
P ool-VOLs are not registered
to
the newly created pool.
Check t
he
specified content,
and
ret
ry the operation.
W
5
3110 55502
The Pool ID setting is
incorrect.
Check the specified content,
and
retry the operation.
W
5
3110 55503
The specified Pool ID
already exists.
Check the specified content,
and
retry the operation.
W
5
3110 55504
The Pool-VOL cannot be
registered to the Pool,
because the C LPR number
of the Pool-VOL is different
from the number of the
volumes already registered
to the Pool.
Check the specified content,
and
retry the operation.
W
5
3110 59311
If any Pool doesn’t exist,
V-VOL management area is
initialized. When Pool exists
The optimization of Pool is
executed, and it takes 20
minutes or less. Do you
want to continue?
Select [OK] to continue
processing, or select
[Cancel] to stop processing.
W
5
3110 59312
Do you want to continue
discard the changed setting
and processing it?
Select [OK] to continue
processing, or select
[Cancel] to stop processing.
W
5
148
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes