HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)

• detailed information about logical paths (see
“Displaying Information about Logical Paths”onpage88)
• detailed information about ports on the local storage system (see
“Displaying Information about Por ts on the Local Storage System” on page 89)
• Preview: Displays changes tha t have be en made in the window. When you change settings in
the
window, the changes will be displayed in the Preview list before the changes are applied to
the
storage systems. If you are sure that information in the Preview is correct, select the Apply
button to apply the settings that you have made.
• Operation: Indicates the operation in progress in the DKC Operation window.
• Apply: Applies the settings in the Preview box to the storage systems.
• Cancel: Cancels the settings displayed in the Preview box.
Note : Information on the DKC Operation window will be updated when you do one of the following:
• Select another tab an d then reselect the DKC Operation tab.
• Click File, Refresh on the menu bar of the Remote Web Console main window.
• Select th e Apply button.
• Select modify mode when you are in view mode.
• Close the DKC Status window.
Displaying Information about Remote Storage Systems
To display information about remote storage systems:
1. Display the DKC Operation window.
2. In the Di
splay box, select DKC.
The treeand thelistdisplay theremote storage systems.
Figure 42 Remote Storage System Informa tion in the D KC O p eration Window
• Tree: Lists the remote storage systems of each LDKC in the local storage systems. The following
information appears to the right of the icon for the remote storage system:
• controller ID of the remote storage system (the model name of the remote storage system)
• serial number of the remote storage system
• path group ID
Note : LDKC#01 cannot be used in this version.
The icon for the remote storage system indicates the status of the logical paths between the local
storagesystem and theremotestorage system:
Allthe logicalpaths areinnormalstatus.
A failure occurred at some of the logical paths.
• List: Displays information about the remote storage systems:
• Controller ID displays the controller ID and the mo del name of the storage system in a remote
storage system. The icon indicates the status of the logical paths between the local storage
system and the remote storage system:
Allthe logicalpaths areinnormalstatus.
A failure occurred at some of the logical paths.
XP24000 Continuous Access Journal Software User a nd Reference Guide
87