HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)

Note: If a volume is an external volume, the # symbol appears after the LDEV number. For
detailed information about external volumes, see the HP StorageWorks XP24000 External
Storage Software User’s Guide.
Note: If the primary data volume is a volume of an HP XP12000 Disk Array, 00 is displayed
as
the LD KC numbe r.
• S-VOL: Indicates the secondary data volume.
The firstlinedisplaysthe port number,the GID, theLUN,and theLDKC:CU:LDEV(thenumberof
the
LDKC, the number of the CU, and the number of the LDEV) of the secondary data volume. The
GID
is a group number for a host group. If the secondar y data volume exists in the local storage
system, the first line also displays the CLPR number and the CLPR name. If the secondary data
volume is a LUSE volume, the LUN is the LDEV number of the top LDEV ( that is, the smallest LD EV
number in the group of LDEVs that are combined as a LUSE volume).
Thesecondlinedisplaysthe device emulationtype.
The third line displays the volume capacity.
Note: If a volume is an external volume, the # symbol appears after the LDEV number. For
detailed information about external volumes, see the HP StorageWorks XP24000 External
Storage Software User’s Guide.
Note: If the secondary data volume is a volume of a n HP XP12000 Disk Array, 00 is displayed
as
the LD KC numbe r.
• CLPR: Indicates the CLPR number and the CLPR name of the volume in the local storage system.
• M-JNL Group: Indicates the master journal group.
• R-JNL Group: Indicates the restore journal group.
• Mirror ID: Indicates the mirror I D.
• CT Group: Indicates the consistency group number.
• S/N (CTRL ID):Displays the five-digit serial number and the control ID of the secondar y storage
system. The control ID is enclosed by parentheses.
• Path Type: Indicates the channel type of the path interface between the storage system (fibre).
Note: In the current version, the channel type is always displayed as Fibre.
• Initial Copy Priority: Indicates the priority (scheduling order) of the initial copy operations. The
value can be within the range of 1 to 256 (disabled when the status becomes PAIR) .
• Error Level: Indicates the range used for splitting a pair when a failure occurs. The default
is
Group.
• Group: If a failure occurs with a pair, all pairs in the consistency group where the pair
belongs will be split.
• LU: If a failure occurs with a pair, only the pair will be split.
• S-VOL Write: Indicates whether write I/O to the secondar y data volume is enabled or disabled
(enabled only when the pair is split).
• Ot her Information: Displays the following:
• Establish ed Time: Indicates the date and time when the volume pair was created.
• Updated Time: Indicates the date and time when the volume pair status was last updated.
• Refresh t he Pa ir O peration window after this window is closed: If this check box is selected, the
Pair Operation window will be updated when the Detailed Information window closes.
• Previous: Displays the pair status information for the previous pair in the list (the pair in the
row
above).
Note: The Display Filter settings (see
“Filtering Information in the List in the Pair Operation Window” on page 125) c an affect
how Previous or Next is recognized.
Note: The list displays a maximum of 1,024 rows at once. The Previous and Next buttons on the
Detailed Information window can only be used for the currently displayed 1,024 rows.
• Next: Displays the pair status information for the next pair in the list (the pair in the row below)
Note: The Display Filter settings (see
“Filtering Information in the List in the Pair Operation Window” on page 125) c an affect
how Previous or Next is recognized.
Note: The list displays a maximum of 1,024 rows at once. The Previous and Next buttons on the
Detailed Information window can only be used for the currently displayed 1,024 rows.
XP24000 Continuous Access Journal Software User a nd Reference Guide
133