HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)

<Pair Status at
30/04/2005 12:34:56>
Port Gr(Name) LUN Vol Status JNG Mr S/N(LDKC) CNTL Port Gr LUN Vol JNG Type
CTG
ErrLv Sync
CLPR
CopyTime
CL3-A 00(3A-G00 )
100 00:08:00 PAIR 01 02 11111(00) 05 CLA-R FF 7EE 00:3F:FF F6 P-VOL
09 Group 100
00
:CLPR0 001:00:00
CL3-A 00(3A-G00 )
101 00:08:01 SMPL
01:CLPR1
CL3-A
00(3A-G
00 )
102 00:08:02 PSUS 10 02 11111(00) 05 CL1-E FF 7EE 00:3F:F6 ED P-VOL
12 LU 80 02:CLPR2
(1) (2) (3) (4)
(5)
(6) (7) (8) (9) (10) (11) (12) (13) (14) (15)
(16) (17) (18) (19) (20)
(11) Group number of host group in the remote
(1) Port in the local storage system
storage system
(2) Group number and name of host group in the
local storage system
(12) LU number in the remote storage system
(the length of a n
ame is limited to a maximum
of 16
characters)
(13) LDKC number, CU number and LDEV number
(3) LU number in the local storage system
in the remote storage system
(4) LDKC number, CU number and LDEV number (14) Journal group number in the remote storage
in
the local storage system system
(5) Status of the pair (15) Type of volumes in the local storage system
(6) Journal group number in the local storage
(16) Consistency group number
system
(7) Mirror ID
(17) Error level
(18) Progress of copy operation. Or,
synchronization rate (that is, concordance rate)
(8) Serial nu
mber of the remote storage system
between the data volume before the p air was
split and the data volume after the pair was split.
(9) Controller ID and model name of the remote
(19) CLPR number and CLPR name
storage system
(10) Port number in the remote storage system
(20) Copy time
Note: If a vo
lume is an external volume, the # symbol appears after the LD EV number. For detailed
informati
on about external volumes, see the HP StorageWorks XP 24000 External Storage Software
User’s Gui
de.
Note: 00 is
indicated as the LDCK number when the volume is a volume of an HP XP12000 Disk Array.
Figure 61 Example of an Exported Text File
To save information in a text file:
1.
If necessary, follow the instruction in “Reviewing the Pair Operation Window”onpage125 to
filter informationinthe list.
2.
In the Pa
ir
Operation window (Figure 3 7 on page 81), click Expor t.
Amessag
e
appears and asks if you want to save volume pair information in a file.
3. Click OK to close the message.
A
window appears and prompts you to save a file.
4. Enter the n a m e of the file and then click Save.
A
messag
e
appears when Continuous Access Journal finishes saving the file.
5. Click OK to close the message.
The export processing stops if Subsystem or an LDKC is selected in the tree, and you click Cancel
in the
dialog box that is displayed during export processing.
XP24000 Continuous Access Journal Software User a nd Reference Guide
127