HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)
A journal group in initial status.
Journal volumes are registere d in this journal group, but no data volumes
(primary data volumes nor secondary data volumes) are registered in this
Initial
journal group.
When you create a Continuous Access Journal volume pair, data volumes
will be registered in a journal group. The status of the journal group will
change to Active.
Either of the f
ollowing:
• Initial copy i
s
in progress. The primary data volume and the
secondary da
ta volume are not synchronized.
• Initial copy
is
finished. The primary data volume and the secondary
Active
data volume
are synchronized.
Note
:If a jo
urnal
group is in Active status, some of the data volume
pairs in the journal group might b e split. If this happens, the word
Warning is displayed. To restore such data volume pairs, use the
Pai r Operation window. For details on how to restore them, see
“Restoring a Pair of Data Volumes (Pairresync)”onpage136.
An operation for splitting the mirror has been started. The status of the mirror
will immediately change to Halting.
HaltAccept
Note
: HaltAccept can indicate status of restore journal groups, but cannot
indicate status of master journal groups.
An operation for splitting or deleting the mirror is in progress. The primary
data volume and the secondary data volume are not synchronized.
When you split a mirror, the status will change in the following order:
Halting
Halting, Halt, Stopping,and finally Stop.
When you delete a mirror, the status will change in the following order:
Halting, Halt, Stopping, Stop,and finally Initial.
Halt
An opera
tion for splitting or deleting the m irror is in progress. The primary
data vo
lume and
the secondary data volume are not synchronized.
An operation for splitting or deleting the mirror is in progress. The primary
Stopping
data volume and the secondary data volume are not synchronized.
Either of the following:
• An operation for splitting the mirror is finished.
Stop
•
The operation for deleting the mirror is in progress.
The primary data volume and the secondary data volume are not
synchronized.
Blank Neither journal volumes nor data volumes are registered in this journal group.
• CTG: Indicates the num ber of a consistency group to which the mirror belongs.
This column is blank if there is no consistency group.
• S/N(LDKC): Indicates the serial number of the remote storage system and the LDKC number.
This column is blank if the at tribute of the journal group is neither Master nor Restore.
• Pair JNLG: Indicates the number of a journal group in the remote storage system.
This column is blank if the at tribute of the journal group is neither Master nor Restore.
• Controller ID: Indicates the controller ID (mod el name that indicates the m o del) of the remote
storage system.
This column is blank if the at tribute of the journal group is neither Master nor Restore.
Note
: The controller ID for a storage system is 5.
• Path Watch Time: Indicates the time for monitoring blockade of paths to the remote storage
system.
• Volume: Indicates the number of data volumes that are registered in the mirror.
• Capacity: Indicates the total capacity of data volumes that are registered in the m irror.
• Previous: Displays detailed information about the previous journal group.
• Next: Displays detailed information about the next journal group.
118
Using
Journal Groups