HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 99
Table 58 Detailed Information for Set CommandDevSec Operation
Set Fibre Address Operation
[LUNM]
Logical Unit Number Manager function
Set Fibre Address
Set Fibre Address operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 59 and Table 60.
Table 59 Detailed Information for Set Fibre Address
Item Description
CU:LDEV The CU and LDEV numbers of the logical volume where the command device security
setting is changed.
CommandDev Indicates whether the command device setting is enabled or disabled.
Disable or Enable is output.
Num. of LDEVs The number of logical volumes where the command device setting is changed.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Fibre
Address,,Normal end,Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2
Item Description
Port The name of the port that the address has been changed.
Fibre Addr The address of Fibre Channel port after change using the number from 1 to 126.
See Table 60 for relation of number and Fibre Channel port address.
Num. of Ports The number of ports where address has been changed.