HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 97
Set Channel Speed Operation
[LUNM]
Logical Unit Number Manager function
Set Channel Speed
Set Channel Speed operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 56.
Table 56 Detailed Information for Set Channel Speed Operation
Set CommandDev Operation
[LUMN]
Logical Unit Number Manager function
Set CommandDev
Set CommandDev operation
Normal end
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Channel
Speed,,Normal end,Seq.=xxxxx
+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,10}],Num. of Ports=4
Item Description
Port The name of the port that the host speed (data transfer speed) is set.
Speed(Gbps) The host speed set. The unit is Gbps (Gigabits per second). When Auto is set for the host
speed, Auto is output.
Num. of Ports The number of ports where the host speed is set.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDev,,Normal
end,Seq.=xxxxx
+{CU:LDEV,CommandDev}=[{0xXX:0xXX,Disable},{0xXX:0xXX,Enable}],Num.of
LDEVs=2